Currencies

Categories

Who's Online

There currently are 67 guests online.

RGB color LED light strips infrared remote controller

  • Model: RF-RGB-C-24-AL
  • Shipping Weight: 0.45 lbs

(image for) Ask a Question

$9.60

Please Choose:

Operation Voltage and Frequency






Min:  10
Add to Cart:

24-key infrared LED RGB controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; At the same time, it has many advantages such as convenient connection ,simplicity to use and others. According to the actual need of customers, it can carry out jumpy changing, gradual changing and other effects of change. Total 24 modes for your choice.

Technical parameters

Working temperature: -20-60
Voltage supply: Option voltage DC5V, 12V, 24V. Please choose from below listed
Output: 3 channels 
Connecting mode: common anode or common cathode
External dimension: L128ΧW65ΧH25 mm
Net weight: 146g
Gross weight: 189g
Static power consumption: <1 W
Output current: <4 A (each channel)
Output power: 5 V: <60W, 12V: <144W, 24V: <288W
Direction for use 1. Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between connecting wire before you turn on the power. 2. Standard color changes as follows:
Brightness +( 16 in all ) Brightness-( 16 in all ) Off On
Static red Static green Static blue Static white
Static orange Static pea green Static dark blue 7 color jumpy change
Static dark yellow Static cyan Static brown All fade out & fade in
Static yellow Static light blue Static pink 7 color fade change
Static straw yellow Static sky blue Static purple 3 base color jumpy

Direction:

When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light change is up/ down,there are 100 step in all.
The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3 base colors fade/7 colors fade”, you can press one more time to change it.
when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.
When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single color Stroboflash/ Gradual changing”.

Application:For RGB color LED strips,point source of light,led RGB Module, glass curtain wall light and so on

Your IP Address is: 34.205.142.9
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart