Currencies

Categories

Who's Online

There currently are 109 guests online.

Solar street(garden)lighting controller, 12V and 24V, 6A/10A/15A

  • Model: Solar-controllerAL2415
  • Shipping Weight: 0.7 lbs

(image for) Ask a Question

Starting at: $25.60

Please Choose:

Current






Add to Cart:

Solar street lamp controller, It is using Micro-controller control and intelligent senses. It can automatically open the lamp at dark, and turn to high-light automatically after giving the lamp low-light for half an hour. And then turn to morning light when set time is up or at day break. After that, the lamp can be closed automatically after half an hour (the time of high-light can be set.)  The controller also deals with the batteries charge and discharge. When the battery is in low voltage, the lamp will be closed automatically to protect the battery. When it is full, the lamp will be into PWM unstable charge automatically. While at dark, the charging circuit will be turned off to prevent battery discharge through the solar panels. Moreover, this controller has a comprehensive protection circuitry to prevent accidental damage to the controller. See here about how to apply this Solar charging and Lighting controller.
 
Functions:
1. Light control + time control turn on/off + time control turn on + light control turn on.
2. It can set light intensity to save energy consumption, and really achieve saving the energy
3. It can prevent the battery from over-charging and over-discharging.
4. It can prevent reverse charging (the battery charges the solar panel).
5. It can prevent reverse connection of the battery and solar panel.
6. It will start up the lighting system in the evening automatically according to the intensity of the light.
7. It will shut down the lighting system according to the time setting or shut down the lighting system automatically when it is dawn.
8. It has a LET indicator of the working condition of charging and discharging:
One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly; flickeringly means floating charge, no light means stop charging.
One piece of Load Indicator LED (mark: Light). When it is bright, there is output and load can work; if LED goes out, means there isn’t output and the load cannot work.
Battery indicator:  red under =voltage, Green =full    Yellow =normal

Parameter Sheet:

Model

AL2415 6A

AL2415 10A

AL2415 15A

System voltage

12V / 24V Automatic distinguish voltage

Max charge current

6A

10A

15A

Max discharge current

6A

10A

15A

Charge off voltageHVD

14.4V / 28.8V

Low Voltage DirectiveLVD

10.8V / 21.6V

Low Voltage RestoreLVR

11.8V / 23.6V

Light  operate

light control turn on + light control turn off

Light time control

Light control turn on/off + time control turn on/off

Time control classification

0.5 hours startedhalf an hour of one grade up to 10 hours

Out put route

single output, 12V DC or 24V DC depending on the battery

Ambient temperature

-25-----+55

Safe degree

IP55, Means that can be used in outdoor

Quiescent dissipation

20mA

Max loop voltage drop

350 mV

                        Weight:280g, Size:134*100*31 mm


Your IP Address is: 3.15.202.214
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart