Currencies

Categories

Who's Online

There currently are 74 guests online.

MR16 LED light bulbs, 8 Watt, 6 pcs 1.2W LED, dimmable, AC12V

  • Model: MR16-8W-dim-AC12V-OEM
  • Shipping Weight: 0.19 lbs

(image for) Ask a Question

$7.00

Please Choose:

The light output Color Temperature and Angle

Color Temperature





Beam Angle





Qty Discounts Off Price
10-19
$7.00
20-39
$6.65
40-59
$6.30
60-99
$5.95
100+
$5.60
* Discounts may vary based on options above
Min:  10
Add to Cart:

LED light bulbs for home, MR16, 8 watt, Dimmable LED spotlights, GZ4 standard base, Dimension Φ49.8×51.5mm length (not including pins), Using 6 pcs 1.2 watt high power LED, With 36 degree beam or 60 degree beam, Warm white 3000k~ or daylight white 5000k, Light output 510 lumens for warm white, 580 lumens for daylight, comparable to 50 watt incandescent bulb or halogen bulb, DC/AC 12v operation. Dimmability: Compatible with Triac dimmers on market such as Lutron, Leviton, Legrand, Osram,and GE etc. dimming range is from 5~100% and very stable. Housing Material: Aluminum Extrusion. These bulbs are perfect for the inside case lighting for jewelry,  no heat and good lighting. Please note that all the Triac dimmers just work on AC power, Means that if this spotlight work on DC power, It is non-dimmable.

•Adopting NICHIA's latest 119 series LEDs,lumens of natural white up to 580lm,and of warm white up to 505lm.
•Its form-factor guarantees a 100% form-fit on the back-side of the lamp(exact form fit with halogen lamps)
•Delivers a beam intensity which reaches that of a 50w halogen lamp. That it can replacement for 50W halogen lamp directly.
•It uses an active power factor correction structure to control the input current, so that the PFC can reach over 0.95 when in conjunction with electronic transformer.
•Dimmable down to 15% with most of trailing edge dimmers,when in conjunction with recommended electronic transformers.
•0-100% dimmable with PWM or 0-10V dimmer.
•Indoor use,-5°C-35°C.Direct retrofit replacement for halogen and GLS lamps in hospitality,hotel,
restaurant,marketplace,shopwindow,museum and similar applications, especially with long burning hours.
•Spot, task and general lighting in nearly all existing luminaires

Operating Instruction
1.  It can smoothly dimmable from 0-100% with PWM dimmer or 0-10V dimmer.
2.  Dimming can be achieved with trailing edge triac dimmer (110V or 220V) or leading edge triac
dimmer (110V or 220V) that rang from 15%-100%.   (When using an electronic transformer,in
conjunction with a trailing edge dimmer, the performance will be the best)
3.  As a system, the maximum number of lamps is limited by the maximum power of the transformer,
and the load power is calculated based on the wattage of the lamp which is replaced. (Xpcs * 50W),
not the lamps’ consuming wattage (Xpcs *8W).
For example,60W transformer will only hold 60/50=1pcs
4. Please make sure work with the correct voltage 12VDC/AC(9-15VDC). Do not work with24V, 110V or 220V
5. If you choose Electronic transformer, please make sure to select a good quality Electronic Transformer(simplified version is not acceptable),of which the output is 12VAC.And it should be suitable for leading-edge and trailing-edge dimmer
6. When using electronic transformer, the brightness of lamp will be about 90% of the one with DC transformer.
7. Not suitable for high temperature and moisture area.
8. Not suitable for heavy air-polluted area.
9. Not suitable for close system fixture.


Your IP Address is: 44.213.75.78
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart