Currencies

Categories

Who's Online

There currently are 73 guests online.

4W 7507 led turn signal bulb equivalent 1156 1157 3156 3157 7440 7443 BAU15S/ 7507 LED Turn Signal Light

  • Model: 4w-CAR-LED-33LED5630-GZYD
  • Shipping Weight: 0.06 lbs

(image for) Ask a Question

$3.17

Please Choose:

The light output Color Temperature and Angle

Color Temperature








Base or Socket of Lamp










Qty Discounts Off Price
2-19
$3.17
20-49
$3.01
50-99
$2.85
100-199
$2.69
200-299
$2.54
300+
$2.38
 
* Discounts may vary based on options above
Min:  2
Add to Cart:

7507 led turn signal bulb equivalent,  LED light bulbs for cars, BAU15S/ 7507 LED Turn Signal Light, LED turn signal and back-up light bulb for both motorbikes and cars. These are SUPER EASY to install. There is no modification needed at all. Since LED lamp has + and - terminals, so if there is no lighting after inserting it into socket, just simply change the terminal oppositely.
This LED bulb is best one use for led braking light, led turn signals light, back-up light bulb, Just directly replace the halogen bulb, It don't need to add a pair load resistors to prevent hyper flashing or malfunction problem.

Base option: 1156 3156 7440 single filament, 1157 3157 7443 Dual filament, BAU15S/ 7507 LED Turn Signal Light
Using 33 pcs 5630 led chip
Consume wattage: 4 Watt actural testing power
AS 20~25 watt halogen bulb replacement, replacing turn signal bulb with led directly, Not neet extra  resistors, led turn signal bulbs with built-in resistors.
Light output 500 lumens 
Input voltage: 10~14V DC
Colors: White, red, yellow option. Cool white Strobe Flashing for 1156 base only, Cool white + Cool white Strobe Flashing for 1157 base only
Dimension: T20. T25, S25
Lifespan: 50000 hours
Vibration resistant
Immediate response on/off

The steps of replacing front turn signal bulbs:
1.Left headlight.
2.Remove the turn signal rubber cover from the headlight housing.
3.Press the retaining catches together and pull the bulb holder straight out.
4.The bulb holder and bulb must be replaced as one unit.
5.Position the bulb holder in the socket and push it into place.
6. Put the rubber cover back in place.


Your IP Address is: 44.200.179.138
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart