Currencies

Categories

Who's Online

There currently are 51 guests online.

20W G12 led bulb replace PHILIPS MASTERColour or Osram metal halide lamp, G12 LED replacement bulbs

  • Model: G12e27-240LED-277V-1688szgnl
  • Shipping Weight: 0.2 lbs

(image for) Ask a Question

Starting at: $8.99

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Operation Voltage and Frequency





Base or Socket of Lamp







Qty Discounts Off Price
5-19
$8.99
20-49
$8.54
50-99
$8.09
100-199
$7.64
200-299
$7.19
300+
$6.74
 
* Discounts may vary based on options above
Min:  5
Add to Cart:

20 watt G12 LED bulb is a Osram metal halide lamp G12 LED replacement bulbs, G12 led retrofit lamp. This metal halide led replacement has 2 kind Bi-pins base: LED bulb with G12 base, LED bulb with G8.5 base, G12 LED bulb, G12 LED Lamp Osram, G12 bulb, G12 LED replancement Bulbs, t6 g12 led bulb, 20 watt G12 LED replacement bulbs of PHILIPS MASTERColour CDM-TC 150W/942, CDM-TC 150W/930, Directly replace.  CE RHOS approved.

Housing Metal: Aluminium + PC, Cooling for lamp heat dissipation best even if in an enclosed fixture. The other bulb with an electric fan built-in is not suitable for enclosed fixture environment. 
LEDs:using 240 pcs 1 watt Seoul Semiconductor led chip
Demension(D×H)mm: Diameter 30mm,  MOL118mm for E27 base,MOL 115mm for G12 base.

G12, E27, E14 base option

Input voltage option : AC100-277V and AC85~265V,  So you can buy cheap one if not for work on AC 277V.
Input Voltage: AC100-277V Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V, AC 277V, 50Hz/60Hz And all other mains voltage between AC100V and AC277V.
Wattage: 20W
Beam angle: 360 degree
Colour rendering index(Ra): >85
Colour temperature(K) option: 3000k, 4000k,  6500K
Average Lifetime(Hr): 50000
Luminous Flux(Lm):  2700Lm for cool white

INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture. 


Current Reviews: 1

Customers who bought this product also purchased...

Your IP Address is: 52.54.111.228
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart