Categories

Who's Online

There currently are 113 guests online.

15W G12 ceramic base LED replace MASTERColour CDM-TC 70W/942 930

  • Model: G12-96LED-CERAMIC-265V-SZYC
  • Shipping Weight: 0.18lbs

Ask a Question

$8.25

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Qty Discounts Off Price
2-19
$8.25
20-49
$7.84
50-99
$7.43
100-199
$7.01
200-299
$6.60
300+
$6.19
 
* Discounts may vary based on options above
Min:  2
*Mixed OFF
Add to Cart:

G12 ceramic-base LED bulb, LED bulb G12 Base 277V, 15 watts G12 Bipin LED lights bulbs. G12 LED replacement bulbs for PHILIPS MASTERColour CDMTC 70W/942, CDMTC 150W/930. The G12 LED lamp can be used to replace the metal halide lamp. CE RHOS approved.

G12 lamp Osram replacement, LED bulb G12base as OSRAM Metal Halide, G12 lamp Osram replacement, G12 bulb, G12LED bulb, as OSRAM Metal Halide Replancement Bulbs, G12 Bulbs, G12 Bulbs. Bi-Pin Metal Halide Replacement LED Bulb - G12 Base Metal Halide Bulbs, G12LED bulb as OSRAM Metal Halide Replacement, G12 Lamp Osram Replacement, G12 Bulbs G12 LED Replancement Bulbs. This replaces the traditional G12 halogen reflectors or halogen capsules used for general lighting purposes.

Housing Metal: Aluminium + ceramic, Cooling for lamp heat dissipation best even if in an enclosed fixture. The other bulb with an electric fan built-in is not suitable for enclosed fixture environment. 

LEDs: using 96 pieces 2835 Seoul Semiconductor's led chip
Demension(DxH)mm: 30V*V101(MOL)

Input Voltage: AC85-265V. It is capable of operating at mains voltages up to AC110V, AC120V or AC230V.
Wattage: 15W
Beam angle: 360 degree
Colour rendering index(Ra): >85
Colour temperature(K) option: 3000k, 4000k, 6500K
Average Lifetime (Hr): 50000
Luminous Flux(Lm): 1500Lm

INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture. 


Current Reviews: 1

Your IP Address is: 3.93.74.25
Copyright © 2023 www.ledlightbulb.net/. Powered by Zen Cart