Retrofit fluorescent LED, 2D led retrofit and 2D fluorescent led replacements are 2d 4-pin replacements, 2d cfl replacements, 16w 2d LED replacement, 38w 2d replacement, 8w 2d fitted replacement, 28w 2d fitting replacements, 28w 2d conversion, ge 2d replacement, 4 pin led bulb, and 28w 2d conversion.
2d led replacement. 2d led replacement for 2d fluorescent tubes. 4 Pin 2d led replacement. 2 Pin 2D LED Light Bulb. Direct retrofit replacement for 4 pin and 2 pin fluorescent lamps. Use with magnetic ballast fittings. Ideal for use with PIRs or other presence/light level detectors. Use in schools, hospitals, car parks, sports centres, stairways and corridors, hotels, bars, pubs. Clubs, Factories, Cold rooms etc.
How do you choose between a 2D or U-shaped replacement for fluorescent leds? Many customers have difficulty deciding which color temp lamp to buy. Imagine being able to change the color of your temp lamps from 3000K-4000K-6500k with a simple flip of a switch. Thanks to technological advancements in LED technology, this is possible. Both color preference as well as warm dimming LED technology are based upon white color temperature.
You can remotely change the color temperature of light colors. One switch can be used to change the color temperature of cool white, while two are suitable for warm white and three for nature white. To install your light, you can choose from a variety of color temperatures.
How to Change a 2D fluorescent light into an LED light. Replacement ring fluorescent tube leads. Connect to your mains voltage power source. This will save you 55% on energy. There is no fluorescent paint, gas contamination, Green Light Source and expensive ballasts. With powerful magnets, fitting the ring light panel to your fixture is easy. The LED lamps can be used to replace the socket if the CFL ballast is not compatible. There is no wiring required. The new LED lamp will work with the existing ballast. The existing CFL ballast will not work with the new led light. To replace a 4-pin CFL tube with an LED tube, remove the choke or ballast.
This image shows how to replace an existing 2D Fluorescent Tube with the 2D replacement 2D Fluorescent Tube. The replacement LED has many LEDs that are only 20 watt. They can be found on the disc that plugs into an existing socket. Similar light output as a 2x20 Watt Fluorescent tube.
These high-quality SMD LED replacement bulbs are energy efficient. They are more energy efficient than standard bulbs and last 50 times longer. SMD chip technology provides the best light output-to-consumption ratio.
