5 watt LED light bulbs for cars, LED turn signal and back-up light bulb for both motorbikes and cars. These are SUPER EASY to install. There is no modification needed at all. Since LED lamp has + and - terminals, so if there is no lighting after inserting it into socket, just simply change the terminal oppositely.
This LED bulb is best one use for led braking light, led turn signals light, back-up light bulb, Just directly replace the halogen bulb, It don't need to add a pair load resistors to prevent hyper flashing or malfunction problem.
Base option: 1156 3156 7440 single filament, 1157 3157 7443 Dual filament
Using 33 pcs 5630 led chip
Consume wattage: 5 Watt actural testing power
AS 20~25 watt halogen bulb replacement, replacing turn signal bulb with led directly, Not neet extra resistors, led turn signal bulbs with built-in resistors.
Light output 700 lumens
Input voltage: 10~14V DC
Colors: White, red, yellow option
Dimension: T20. T25, S25
Lifespan: 50000 hours
Immediate response on/off
The steps of replacing front turn signal bulbs:
2.Remove the turn signal rubber cover from the headlight housing.
3.Press the retaining catches together and pull the bulb holder straight out.
4.The bulb holder and bulb must be replaced as one unit.
5.Position the bulb holder in the socket and push it into place.
6. Put the rubber cover back in place.