E39 LED bulb. HPS replacement led bulb. Replacements for HPS lights Replacement for high pressure sodium light High pressure sodium light replacement 70W. These LED High Bay Lights are suitable for use in warehouses and factories. High pressure sodium can be replaced by LEDs. LEDs have a better control of their light than traditional sodium bulbs. An LED with a lower wattage can replace a sodium bulb of high wattage. High pressure sodium lighting cannot cope with the demands of high-definition broadcasts at 4K and 8K because it has a yellow hue that doesn't reflect the real appearance of things. XLamp® Cree's led chip CX2530 offers High CRI 95 LED lighting. This is an LED light-emitting diode (LED), which has a high color rendering index. High CRI lighting delivers extraordinary color quality, making your home's colors appear richer, more natural and vibrant. Hospitals, museums, print studios, retail shops, and other places that require high-quality lighting are advised to have a CRI of at least 90. CRI scores of 80 are acceptable. They may also be helpful in areas that need more ambient or soft lighting. Color inaccuracies that are less than 70 CRI will be more obvious to the human eye.
Here catalogue included the products of Led lights for warehouse lighting, Led high bay light fixtures, Warehouse light fixtures, Warehouse Lighting offers high-bay LED lighting as well as industrial lighting fixtures. High bay LED lights can be used to illuminate commercial warehouses.
HPS vs. LEDs
HPS lighting is unrivaled in terms of energy efficiency. HPS lighting isn't the only option. Light Emitting Diode (LED) is the only alternative. The popularity of this technology is not due its low energy consumption. LED lamps produce light that is brighter than dim yellow HPS lamps. LEDs produce less heat and energy which makes them last longer.
If they are not properly disposed, HPS lamps could also pose a danger to the fire safety. If the lamp is broken, it could ignite sodium metal.
Three reasons warehouses, factories, and other businesses are switching over to LED High Bays.
1. They can lower their lighting costs. To produce the same number of lumens as ground, an LED High Bay consumes 25% less power than a HID High Bay. A 300W LED can replace 1000W HID. To drive the 1000W HID, the ballast can use between 100W and 200W. The 300W LED High Bay Light can replace between 1100-1200W. Four LED High Bays consume the same power as one HID High Bay.
2. Low maintenance costs. Warehouses and factories with 25-foot ceilings have high bays. There are floors in some facilities that make it difficult to transport manlifts to replace damaged ballasts and bulbs. Ballast and HID bulb replacements can be expensive due to the high labor cost and loss of floor productions. Made in China LED High Bays are guaranteed to last for over 60,000 hours. This allows you more time to produce lights than managing them.
3. Extreme environments can lead to harm. Extreme environments are possible. Extreme conditions can lead to ballasts and HID lamps failing in factories. LED is a solid-state device that resists vibrations and other factors that can cause HID bulbs failure. It is possible to save time and money by not replacing an old light.
How to retrofit Mercury Vapor Light Bulb with LED and High Pressure Sodium Lamp
We manufacture LED lights that can be used to change mercury vapor, high-pressure sodium lamps, and halogen lamps. You can use the 500 watts and 1000 W mercury vapor substitute with LED lights in a factory, warehouse, football court, soccer court, ballpark and harbor. Retrofitting 100W mercury valor light bulbs to LED is a great way to save up to 15%. The LED light is water-proof and tougher than halogen light bulbs. You can save a lot of electricity by using LED lights to retrofit mercury 400-watt va lamps and 500W halogen lamps.
Conversion chart for High Pressure sodium to Led, Retrofit of halogen lamps and LED bulbs to replace mercury vapor 1000 watts
Retrofit is an easy way to replace standard halogen and high-pressure sodium lightbulbs with LEDs. You can enjoy 50,000 hour lighting and flicker-free illumination after replacing 1000W mercury va lamps with LED. These types of lighting are also not safe for large areas because they contain heavy metals and poisonous chemicals. LED light, which is non-toxic and more environmentally friendly than traditional lighting, is much safer.
Conversion chart for High Pressure sodium to Led, What power equivalents are needed to replace 500W of mercury vapor by LED?
You can retrofit your 500-watt mercury vaping bulbs by simply considering the power selection. For example, 500W mercury vapour releases 500 * 40 = 20,000 lumen. To replace the mercury vapor, it will need 20000/100 = 125W LED lights. It would save 75% power, if you calculate it! What should I do if I have a project in hand?
Conversion chart for High Pressure sodium to Led
In the past, brightness was synonymous with more power. However, today things are very different. An LED lamp uses 30 watts more than an HPS lamp. The current unit that measures brightness is called the lumen. This is the light produced by a bulb or lamp.
Let's have a look at this HPS-LED conversion chart to illustrate our point.
70 watt HPS = 40 watt LED 100 watt HPS = 50-60 watt LED 150 watt HPS = 80-90 watt LED
250 watt HPS = 90-125 watt LED 300 watt HPS = 150 watt LED 400 watt HPS = 200 watt LED
As you can see, LED lights use less energy and produce higher quality light. It's a smart idea to switch from HPS to LED in your home or office.
We offer complimentary lighting design for mercury vapour substitute. You can consult our designer to get the overall layout of lighting. This will greatly affect the quality of lighting. If you have interest in it, please do not hesitate to contact us a message at email sales@ledlightbulb.net. We look forward to your message. Thanks.
Find the perfect LED Light Fixtures
We can assist you in your high-pressure sodium conversion to LED. We specialize in the manufacture and customization of LED light fixtures. We offer a variety of LED lighting products to meet your needs. You can mount the power supply and the lamp body separately to reduce the weight of the lamp pole, and make it easier to maintain.
What type of light is used for stadiums?
Below are some examples of current traditional stadium lights for international stadiums:
MVF406/1800W, HNF003, MVF401, MVF403, MVF024, EF-2000, YOA56305, YOAX56400, 2kW: HQI-TS 2000WDS, 2kW: HQI-TS 1000WDS, MHN-SA 2KW 400V/956, MHN-SB/HO 2KW 400V/956, LPW2000M/D, LPW1000MB/L, LPP2000MHN-SA, LPP2000MHN-SB.
Traditional lamps cannot cope with the demands of high-definition broadcasts at 4K and 8K, as well as huge energy consumption.
There is a growing trend for LED Stadium Lights to replace traditional lamps with high-quality LED Stadium Lights. This is due to environmental lighting awareness and pursuit of high-quality lighting.
Installation-HPS replacement led bulb Wiring Instructions with Ballast bypass diagrams
When installing HPS replacement led bulb, you may have to bypass the ballast to get it to work. This sounds daunting at first, but it is actually quite simple. You have to remember that you are not adding anything to the setup, just taking something out. Removing a component is always easier. We have a few tips and attached diagram with instructions.
Please remember to NEVER test a bulb with the ballast installed. You will destroy the bulb. Ballasts alter the voltage and will ruin the LED Driver.