MPPT Solar Charge Controller 400W 24V 36V 48V 60V battery charging, MPPT 24V~85V Voltage LED Display Adjustable Waterproof Solar Panel Regulator, Multiple Protections Solar Controller for the charging of lead-acid batteries and colloidally sealed lead-acid batteries, and lithium batteries.
MPPT 24V~85V Voltage LED Display Adjustable Waterproof Solar Panel Regulator, Multiple Protections Solar Controller for Lithium, Acid, Sealed, Gel, Flooded.
IP66 waterproof, dustproof, shockproof, suitable for outdoor use. Max power: 400w. the maximum current is 15A. MPPT solar charge controller is suitable for solar panels of different voltages, with high efficiency MPPT real time tracking. Compatible with various 24V-85V batteries.
Voltage and current LED display, efficiency is more than or equal to 95%. The solar panel charge regulator not only extends battery life and improves system performance, but also has multiple protection functions: battery under voltage, over voltage, output overload, short circuit, battery, solar panel anti-back connect protection, temperature protection.
High efficiency synchronous rectifier circuit structure is adopted, which has high conversion efficiency in low power charging environment. Simple button operation, adjuatable charging and discharging control parameters. A manual with clear connection steps is included. You can install MPPT charge controller anywhere according to your needs!
Support lithium, acid, sealed, gel, flooded, etc. Suitable for solar street light controllers, solar chargers, solar electric bicycle, solar electric tricycles, solar toy cars, household solar panels, solar monitoring and other usage scenarios.
Solar Panel Battery Regulator Charge Controller
High performance booster MPPT charging ways. The system uses solar panel power supply, reduce the power consumption of the battery.
The LED status indicator. 4 LED digital tube current-time display charging current, battery voltage, and solar energy input voltage, running status be clear at a glance.
Complete over-charge, anti-recoil, anti-reverse, and short circuit protection.
1.OVERHEATING PROTECTION: When the internal temperature of the MPPT controller exceeds 100 Celsius thermometer, the MPPT controller will reduce the output power. If the internal temperature continues to rise to 110 Celsius thermometer, the MPPT controller will automatically turn off the output. When the internal temperature of the MPPT controller is lower than 85 Celsius thermometer, the MPPT controller will automatically resume operation.
2.SHORT CIRCUIT PROTECTION: When an unexpected short circuit occurs in the MPPT controller output, the MPPT controller automatically turns off the output and automatically returns to normal after the short circuit removed.
3. INPUT UNDERVOLTAGE PROTECTION: When the input voltage of the MPPT controller is lower than 15V, the MPPT will protectively shut down and automatically resumes operation after the input voltage is normal.
4.OUTPUT ACTIVATE FUNCTION SETTING: When the MPPT controller leaves the factory, the output voltage activate function is on. That is, when the output terminal is suspended, the voltage output closed, and the output voltage shows "0" flashing. When battery access detected, the output automatically activated and the current charging voltage displayed. When the output activation function is not required in some specific applications, the user can press the [OK] key five times to turn off the activation function. At this time, the output voltage column will display "OPE" for 3 seconds, indicating that the operation is successful. In this way, the MPPT controller will output voltage directly after power on. If you need to restart the output activation function, press the [OK] key five times again to turn on the output activation function. At this time, the output voltage column will display "act" for 3 seconds, indicating that the operation is successful. After the output activation function is set, the system will save it automatically, and it will work according to the mode set last time when power on again.
Check before installation:
1. Check whether the appearance is in good condition before installation. 2. Check the label on the MPPT controller housing to verify that the performance of the specification MPTT controller matches the device. 3. The MPPT controller should be fixed on an iron or metal bracket to avoid the vibration of the machine due to instability. 4. The MPPT controller should leave a certain space around the casing for installation. 5. The output and input wires should be as short as possible to avoid excessive energy consumption during transmission. 6. There is high voltage and high current in the machine, and nonprofessionals are not allowed to disassemble it. 7. Input and output terminals are different.