Currencies

Categories

Who's Online

There currently are 31 guests online.

G12 metal halide led replacement, g12 led replacement bulbs, G12 led retrofit 35W LED Lamp Osram LED chip G12 GX8.5 AC 110V 277V

(image for) G12 metal halide led replacement, g12 led replacement bulbs, G12 led retrofit 35W LED Lamp Osram LED chip G12 GX8.5 AC 110V 277V
G12 metal halide led replacement, g12 led replacement bulbs, G12 led retrofit 35W LED Lamp Osram LED chip G12 GX8.5 AC 110V 277V
  • Model: G12PAR30-30LED3030-1688SZMX
  • Shipping Weight: 0.87 lbs

(image for) Ask a Question

Starting at: $26.00

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Operation Voltage and Frequency





Base or Socket of Lamp







Beam Angle









Color





Qty Discounts Off Price
5-19
$26.00
20-49
$24.70
50-99
$23.40
100-199
$22.10
200-299
$20.80
300+
$19.50
 
* Discounts may vary based on options above
Min:  5
Add to Cart:
G12 metal halide led replacement, G12 LED replacement bulbs, G12 LED Lamp Osram led chip, G8.5 PAR30 LED bulb, GX8.5 PAR30 LED bulb, G12 bulb as OSRAM metal halide replacement, 35 watt led spotlight using 30 pcs OSRAM 3030 S5 LED chip.  
Constant current controller inside 
Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V, AC 277V And all other mains voltage between AC100V and AC277V.
Consume wattage: 35 Watts
Beam degree: 10, 15, 25, 45, 60, 70 degree option
Input voltage option: AC 85-265V 50HZ/60Hz,  AC 100-277V 50HZ/60Hz
LEDs: 30 pcs OSRAM 3030 S5 LED chip
Colors: Cool white, Natural white, warm white option
Cool white: CRI Ra>70, 2900 lumens
Natural white: CRI Ra>82, 2800 lumens 
Warm white: CRI Ra>82, 2700 lumens
Dimension.: diameter 95mm x MOL 117 mm(E27 base), MOL 100mm for G12 base                     
Net weight: 250g  
Light body material: Aluminum
Base option: G8.5 Bi-pins base, G12 Bi-pins base, GX8.5 Bi-pins base, E27 screw base
INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture. 

Your IP Address is: 44.200.122.214
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart