Currencies

Categories

Who's Online

There currently are 39 guests online.

40W G12 led retrofit LED bulb replace Philips Clear Hid Bulbs and Osram metal halide lamp, 150w g12 led replacement

  • Model: 40WG12-Heatsilica-xkzm
  • Shipping Weight: 1.26 lbs

(image for) Ask a Question

Starting at: $17.99

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Operation Voltage and Frequency










Base or Socket of Lamp





Beam Angle







Qty Discounts Off Price
5-19
$17.99
20-49
$17.09
50-99
$16.19
100-199
$15.29
200-299
$14.39
300+
$13.49
 
* Discounts may vary based on options above
Min:  5
Add to Cart:

LED bulb G12 Base or G8.5 base replacements, G12 base LED bulb LED bulb to replace Philips Clear Hid Bulbs and Osram metal halide lamp, LED bulb G12 base 277V, G12 PAR30 LED bulb, 40 watt G12 LED light bulbs, 150w g12 led replacement, This LED bulb don't use a built-in electric fan for heat dissipation, But use Heat dissipation silica gel. G12 Bi-pin LED lights bulbs for home use.  CE RHOS approved.

Housing Metal: Aluminium + Ceramic with Heat dissipation silica gel.
LEDs:using COB LED chip
Demension(D×H)mm: 95*138(H)
Input Voltage option: AC100-277V, AC 85~265V,  Triac dimmable AC 110V / 60Hz, Triac dimmable AC 220V / 50Hz

Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V, AC277V 50Hz/60Hz And all other mains voltage between AC100V and AC277V.
Wattage: 40W
Beam angle: 15, 24, 36 degree option
Colour rendering index(Ra): >80
Colour temperature(K): 2800K-6500K
Average Lifetime(Hr): 50000
Luminous Flux(Lm):  >4000Lm

INSTALLITION G12 led retrofit: Replaces high-intensity discharge HID metal halide MH or high-pressure sodium HPS. Please bypass or remove the ballast in the fixture. Reduce the need to hire expensive lifts. Easy to retrofit. Please disconnect or remove the ballast before using the Bi-Pin led bulb. By removing the ballast you save more energy and increase reliability. Please make sure to remove the wires off the ballast, trigger and capacitor so that there is no way that high voltage could be connected to the socket. If possible please remove the ballast, capacitor and trigger from the fixture. Please do not operate in an enclosed or restricted air fixture. 


Your IP Address is: 3.229.117.191
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart