12V, 24V~36V 5 Watt as PHILIPS BAW15S PR5W replacement, equivalent BAW15D 12495 PR5W, BAU15S/ 7507 PR5W as a truck turn signal or boat navigation LED bulb

12V, 24V~36V 5 Watt as PHILIPS BAW15S PR5W replacement, equivalent BAW15D 12495 PR5W, BAU15S/ 7507 PR5W as a truck turn signal or boat navigation LED bulb. 7507 led turn signal bulb equivalent,  LED light bulbs for cars, BAU15S/ 7507 LED Turn Signal Light. 5 watt Multi voltage led bulb, T20 led anchor light bulb boat navigation light, instrument panel LED light, car led bulb braking light  turn signal back-up light bulb,  12V 24V 28V 36V

T20 LED bulb for cars, 1157 3157 7443 braking light Dual filament led light bulbs for cars, LED turn signal and back-up light bulb for both motorbikes and cars

Consume wattage: 5 Watt equivalent  PHILIPS BAW15S PR5W, BAW15D 12495 PR5W, BAU15S/ 7507 PR5W
CRI: 80

Input voltage: /DC 12V, DC 24V ~36V  any DC voltage Between 10V to 36V
LEDs:   SMD LED
Colors: different color

Different base option: How to distinguish 1156, 1157, 47386, 1142, 7507, 3156, 3157, 7440 ,7443 led bulbs?
Dimension: T20.

Glass cover, Not PVC cover

Lifespan: 50000 hours
Vibration resistant
Immediate response on/off

24V 5 watt 1157 led bulb, Maximum withstand voltage 32V, automatic short circuit protection above 33V, normal recovery below 32V.

We also supply PHILIPS P21W replacemment: Maximum withstand voltage 36V

Friendly reminder: This lamp, which is exactly the same as those on the market, is for 12V only. It cannot be used in trucks with a maximum withstand voltage of 24V. It will burn out the circuit board if used for a day.

Our store uses a 32V withstand voltage dedicated circuit board, which can be used in trucks with voltages below 32V.

Note: This yellow turn signal can only be used as a turn signal.

The turn signal burned out in a day after using the brake or fog light.

Dedicated turn signal with an actual power of 21W and ultra-high brightness.

Important reminder:

Anti-flicker LED turn signals require two per car to function properly.

Installing four flash units causes the flash to fire too quickly; replacing the electronic flash units or adding a load converter resolves the issue.