15A dc6v-90v PWM Dimmer for motor Speed Control Switch governor and PWM dimming without external pwm signals led bulb

15A dc6v-90v PWM Dimmer for motor Speed Control Switch governor and PWM dimming without external pwm signals led bulb DC dimmer, DC dimmer for battery charging lighting. PWM DC Dimmer  DC motor governor switch PWM for speed control

PWM DC Motor Speed Control Switch Governor 6V-90V 15A

15A Mini PWM LED dimming speed is controlled by Switch

Working Voltage: DC 12V 24V, 36V and 48V 60v 72v

This dimmer can be application for constant voltage driver LED lighting, it adopted the most advanced PWM (pulse-width-modulation) digital brightness-adjusting technology that enables you adjust the brightness with the infinite knob. It could be capable of meeting different demands for brightness at various times by using the dimming. Also, it can extend the life of the LED and cut down on power consumption. It is ideal for dimming high-power or light bulbs with low power.

The DC Motor Speed Controller with a fuse and a Power-On LED light, which controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).

This Dimmer is using 50V/1000uF Capacitor and IGBT IRF3205

Product parameter:

Control Power: base on voltage 0% - 100%.

Static Current/Quiescent Current 0.02A(standby)

PWM dimming range is from 0 percent to 100 percent, Note that Due to the large Capacitor to control motors, the PWM variable of dimming could range between 30 percent and 100 percent in the case of the constant voltage of driver LED lights.

PWM frequency 13KHZ

Be safe even should the terminals for the negative and positive of the DC power supply reverse

Size: 64*59*30mm, Mount Holes: 3.2mm, 5mm from the hole in the mount to the outside

Instructions to operate:

1.Before you try to join the controller be sure you have the controller's power off.

2.Please ensure that all connections have been checked before you apply power. This could cause damage when you connect the voltage of the source in the wrong side.

3.Turn off your motor, and afterwards modify your potentiometer.The LED will show the level of power and the speed of the motor.

4.You can set the speed at which the motor is running with the help of a potentiometer.

Note:

1.Please not connect to your AC (for instance: your at home, 220V AC ),otherwise it could be burned!

2.The terminals for the negative and positive terminals in the DC power supply can't be reversed.

3.Turn off the power source prior to making any wire modifications.

4.We recommend you to add an appropriate fuse rated the positive supply to avoid any harm from happening.