60 watt 60 by 120 cm LED panel lights, This panel light can be use in DALI bus controller with dimmer, work on DC24V or with other dimmer. How to use Dimmable led panel lights, DALI panel lights DMX512 dimmable panel lights?
Power Consumption: 60 watt
LED Quantity: 644 pcs 3014 SMD LEDs
Luminous Flux: 4900~5100 lumens
1. Constant current control inside, but must be constant voltage input.
2. Can be working with DC24V power supply directly
3. Can be working with any DC24V PWM control system or dimmer, such as DMX512, Dali, RF, 0-10V, etc. The application is very conveniently
4. Made with Super bright SMD3014 LED (Chip Size: 10*23mil)
5. 6mm Light guide to ensure uniform brightness.
6. High accurate constant current driver with very stable quality.
7. Super quality aluminum body ensures super heat dissipation.
8. Very thin body only 12.7mm.
Designed with inside constant current driver, it can be used with different dimmers, Dali, RF, DMX512, 0-10V dimmer, etc.
Controller: Can be working with any DC24V PWM Control System or dimmer(DMX512, RF, 0-10V, Dali, etc.)
Aluminum body to insure heat dissipation and long life-span
Saving up 50% energy consumption
High CRI to insure a truer color of the goods and environment
Instant start, no flickering, no humming
New inner high efficiency (95%) with heat protection system, the constant current
Special circuit design, each LED can work separately thus it can avoid the influence that a broken LED cause
Green environmental protection, lead-free material, conforming to RoHS
No RF interference
Ultra-slim, only 12.7mm thickness
Refined workmanship with good corner seam joint
Excellent thermal management, refined aluminum, lengthens the life span of led light.
1. Hotels, conference, meetings rooms
2. Factories Offices
3. Commercial Purpose
4. Residential/Institution Buildings
5. Schools, Colleague, Universities, Hospitals
6. Call centers, shopping malls and exhibition Hall and other public places
7. Exhibition halls, art galleries, museums, offices, reading rooms, contour range
This product should be installed by trained electricians
Check integrality of the products when unpack the packing
The distance between the light and any flammable materials must not be lessthan0.2m.The distance between the upper part of the installed light and
The ceiling must not be less than 2cm.The light must not be installed into ceilings or walls that contain heat-insulating material.
The main cable must not connect with the low voltage cable or the surface- mounted lights.
Guide the lights’ connecting cables through the drilled-out hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.
Try to avoid looking directly in the LED beam-especially for extended periods of time. Do not shine the LED light in another person’s eyes.