Currencies

Categories

Who's Online

There currently are 64 guests online.

ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong

(image for) ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
(image for) ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
(image for) ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
(image for) ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
(image for) ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
ETL approval T8, 2 FT, 8 Watt LED tube, L-N in 1 side prong
  • Model: T8-ETL-CH-120smd3528-L-N-1side
  • Shipping Weight: 0.75 lbs

(image for) Ask a Question

$19.80

Please Choose:

The light output Color Temperature and Angle

Color Temperature






Housing or Cover







Min:  10
Add to Cart:
T8, 8 watt WITH 120 PCS 3528 SMD LEDs, 800 lumens, ETL approval LED Light tube. UL and CSA Standard: Self-Ballasted lamps and lamp adapters, LED light tube as Fluorescent tube replacement, This tube With  120 pcs 3528 SMD LEDs, As 15W~20W Fluorescent tube replacement. 30mm diameter tube with G13 standard base, As T8, T10, T12 fluorescent tube replacement. Does not use energy wasting ballasts. It will be 55% Energy Savings, No fluorescent paint and gas contamination of premises, Green Light Source, Bypass Expensive Ballasts And Wire Direct. Wide voltage and constant current design, It can work on Mains voltage at AC110V, AC120V, AC220V, AC230V, AC240V, And all other mains voltage between AC85V and AC265V.  See how to install it and replace itThis ETL approval LED tube can not connect mains voltage directly into fluorescent 2 prong, The mains voltage must be connected on one side prong bi-pins, One pin connect to L, Another pin connect to N. Another side prong just as a holder.
Advantages :
·ETL (Control Number: 4000***)
·Power factor: >=0.92 ; >=0.95
· Excellent heat dissipating, high standard stabilized power source
· unique surge protection design, which helps to efficiently avoid inductive lightning strike(and direct lightning flash to buildings)
·Lamp base 90 degrees rotatable
Power: 8W±0.5W
Input voltage: AC85-265V
LED Quantity: 120 pcs SMD
Luminous flux: 800Lm±50Lm.
Parameter:
1. Light Efficiency: 91-106lm/W ;    Light transmittance:  clear cover: 0.95 ;  Semi clear cover: 0.9 ; frosted cover: 0.85 ; stripe wave cover: 0.95
2. Input Voltage: 85V-277V AC   50/60Hz
3. Derating of unit LED electric current: <18mA
4. Power factor: >=0.92  ;  >=0.95
5. Working environment: -40°C~65°C
6. CRI>=75Ra; 
7. Beam angle: 120°
8. SMD 3528,  High Bright 7.5-8 LM/ chip
9. Color temp: Warm White (*3000-3500K)  Neutral White (*4000-4500K)  Cool White (*6000-6500K)
10. Optical Decay: <3% (5,000 Hours)
11. IP Grade: IP50
12. Test: normal functioning in salt water or in glue widely applied in refrigerator interior lighting
13. Lamp Base: G13

 

 


Your IP Address is: 18.97.14.90
Copyright © 2024 www.ledlightbulb.net/. Powered by Zen Cart