Who's Online

There currently are 57 guests online.

18W Osram led chip UL listed SCR dimming 2D fluorescent retrofit

  • Model: UL-LISTED-2D-LED-BULB-18W-zsxx
  • Shipping Weight: 0.45 lbs

(image for) Ask a Question


Please Choose:

The light output Color Temperature and Angle

Color Temperature

Bulb Shape

Qty Discounts Off Price
* Discounts may vary based on options above
Min:  25
Add to Cart:

UL FCC Certificated phase dimming led bulb to replace to Dimmable Osram Philips Fluorescent Lamps. Replace 2D fluorescent tube with LED bulb, Retrofit fluorescent LED, 2D led retrofit , and 2D LED replacements. Warm and cool White Nature white option. 2G11 2d 4-pin led replacement, 2d 2-pin LED replacement. 2d 4-pin led replacement, 2 pin 2 pin led replacement. AC120V Triac dimmable LED bulb 2G11 2G10 LED tube with 36 watt CFL replacement for 2G10, Retrofit fluorescent LED, 2D retrofit led and 2D fluorescent LED replacements.

2G10 LED bulbs that have 4 pins standard base. plugs directly into the fluorescent prong receptacles. It does not require energy-wasting ballasts. It will provide 55 percent Energy Savings, No fluorescent paint or gas contamination of buildings, Green Light Source, Bypass costly ballasts and Wire Direct. How to make use of LED T5 and U-Shape Fluorescent Tube LED ReplacingThe best method to utilize LED lights to replace small fluorescent bulbs.

1.) LED Chip: Uses Osram  led chip

2.) Dimension: 160mm x 160mm*16mm

3)Input Voltage: AC120V 60Hz

4) Luminous flux: >1500LM, Ra>80

5) Life Time 30k Hrs

6.) Colour Temperatures: Cold White and warm white Nature alternative

7.) Power: 16~18 Watt

8.) The socket: wire conects as 2G10 2.G11

9.) Phase Dimming led bulb is replacing Osram or Phillips phase dimming fluorescent 36W

Simple to set up, take off or bypass your ballast Be sure to check carefully the dimensions of the bulb to make sure that the power and voltage are compatible before ordering. Ballasts should be dismantled or bypassed prior installation of the bulb. If you have an existing ballast attached to the fixture, you should remove it prior to installing your led bulb.Otherwise the bulb may be likely to flicker.

Your IP Address is:
Copyright © 2023 Powered by Zen Cart